preloader

SenseCAP M1 LoRaWAN Indoor Hotspot (EU868) 8GB – April

sensecap_m1_1

What is SenseCAP M1

SenseCAP M1 is a high-performing, ready-to-use LoRaWAN indoor gateway compatible with Helium LongFi Network. SenseCAP M1 can connect to  The People’s Network within a few simple steps in minutes, and helps you build LoRa applications with low costs. SenseCAP M1 provides miles of wireless network coverage and data transmission capacity for LoRa/LoRaWAN devices. It helps you join and contribute to the infrastructure of The People’s Network while enjoying the benefits from the Helium community.

 

Features: 

  • Handy Setup to Helium Network. 6 steps, 5 minutes, ready to go.

  • Powered by Mature Hardware Solutions. Raspberry Pi 4(2G/4G/8G RAM) and WM1302/WM1303 (Semtech SX1302/SX1303) baseband LoRa chip.

  • Secured and Reliable. Built-in ECC608 crypto chip, high-security authentication, and reliable connectivity.

  • Automatic Online Upgrades. Automatic OTA upgrades, without manual operation.

  • Remote Diagnosis. Built-in remote diagnostics mechanism, efficient online support.

  • 64GB Large Storage. 64GB MicroSD card large storage, extending the lifetime of the gateway, fulfilling the memory requirement of potential upgrade.

  • Efficient Cooling Solution. Aluminum enclosure with a heatsink and cooling fan inside, ensuring long-term and stable operation.

  • Multiple Accessories. Fiberglass antenna, slider pad for sliding rod installation, and upcoming outdoor enclosure, etc.

  • FCC and CE Certificated. Available for personal and commercial use.

 

Note
SenseCAP M1 Pre-orders are designated as Non-Cancellable/Non-Returnable (“NCNR”), except for the quality problems. You need to contact us to review the problem if you want to return.

 

Specifications

ProcessorRaspberry Pi 4 (Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz)
RAM8GB
Storage64GB MicroSD Card
FrequencyEU868 Version: 863MHz ~ 870MHz
Sensitivity-125dBm @125KHz/SF7
-139dBm @125KHz/SF12
TX PowerUp to 26 dBm
Antenna GainEU868: 2.8 dBi
Antenna Impedance50 Ohm
Antenna Radiation PatternOmni-Directional
Wi-Fi2.4 GHz and 5.0 GHz IEEE 802.11ac wireless
BluetoothBluetooth 5.0, BLE
LoRaWANSupports Class A, C
Input VoltageDC 5V – 3A
InterfacesUSB Type-C (Power Supply) * 1 

Ethernet RJ45 * 1

RP-SMA Female Antenna Connector* 1

Operating Temperature0°C to 50°C
Relative Humidity0% – 90% (non-condensing)
Heat DissipationAluminum enclosure, a heatsink, and a cooling fan
IP GradeIP20
CertificationFCC / CE

Related Post