FAQ-Matchx.io

First things first, The M2 Pro is an outdoor miner with IP 66 standard (Ingress Protection Code) which means it’s waterproof and it can be deployed outside and withstand the harshest weather conditions, even a thunderbolt strike (grounding on board). That drastically changes the durability of the miner and all possible use-cases that come out of it.

Secondly, – the range – only 8-10 M2 Pros can completely cover with LPWAN the city like Berlin and handle thousands of sensors/devices at the same time.

Thirdly, add-ons: which are – LTE module with a prepaid sim-card, Solar Panel and SSD storage – all these updates are coming soon!

It will give you full independence from any wires or any drops in the internet connection (since SSD serves as a backup for all data that goes through your M2 Pro, meaning you don’t have to worry about every time when your miner for any reasons goes offline, all data packets will be stored on this SSD, therefore you won’t lose a single MXC token.

And lastly, apart from hardware supremacy, Helium is simply built using Raspberry Pi solutions which are off the shelf and available anywhere.

The M2 Pro uses patented technology that isnt available elsewhere, these patents cost money and so does the extra effort that we put into our Miner, we built a german engineered miner, and we built it right.

MatchX offers reliable, long distance, wireless LoRaWAN networking solutions for your IoT project. MatchX weather-resistant, outdoor gateways create a reliable low cost network. Only 8-10 Match gateways are required to create network coverage for a large city like Berlin. More than 60k sensors and devices can connect to one gateway. LoRa sensors are ultra-low power and can run 10+ years with a single battery.

Smart City
With rapid advancements in technology, there is a need to find sustainable solutions in order to conserve energy and save costs.
MatchX Smart city

The M2 Pro – is the world’s first IoT crypto miner based on the LPWAN (Low-Power-Wide-Area-Network) technology that ensures high-rewarding mining with minimum electricity costs. The device is made for use by everyone. No expertise required, no hassle with wires, no coding skills, no monitor, no keyboard necessary! Setup in 30 seconds from any iOS or Android device, and the M2 Pro can run anywhere with a Wi-Fi or Ethernet connection. What does it do? The M2 Pro can mine various tokens including MXC, IPFS & DHX, which are then immediately stored in the mobile app MXC DataDash’s in-app digital wallet.

MXC

DHX

BTC (only testnet for now)

=> mining is simutalious

The M2 mines for 10-14$/day in MXC. This has been confirmed by various community members

official answer by MXC: That often depends on the Miner itself. This is ultimately a “Proof Of Participation” model, so ultimately the first essential element you need to ensure is that you are connected to the MXC system via the Data Dash App. You can do this by simply scanning the QR code on your M2 Pro and connecting to the Data Dash App. Once the M2 Pro is connected, you are technically mining. However, to improve your minability it is essential that you place your miner in an elevated position, ensure you don’t incur any internet connectivity interruptions, ensuring up-time. These are the ultimate essentials to mine $MXC and other tokens. Most miners report that they mine around $10USDT to $14USDT with the M2 Pro on a daily basis, yes, on a daily basis, all with very little effort. Of course, there is a general range, and mining of $MXC can increase based on the activity and downlinks you serve, but at present, the approximate rate varies around the above-mentioned amounts. For more information on average returns please ask our followers in our telegram group or on Twitter. The financial return on an M2 Pro can vary greatly, MXC can not give any guarantee on returns, nor on the price of your returns, this is due to the fact that cryptocurrencies are extremely volatile

Yes, there is worldwide shipping from the EU and US warehouse.
The M2 Pro can work everywhere, as long as it has a stable internet connection.

Earnings are derived via the MXProtocol Mining Algorithm, these earnings are primarily based on the following key factors:

• Miner Elevation
• Miner Up-Time
• Miner Accessibility
• Miner Usage
• Data Sent / Received
• Miner Accessories

The M2 Pro doesn’t interfere with other telecommunication devices. As long as you have a good Wi-Fi router (means it can handle all connected devices) you’re safe.

Just run some tests on the connectivity and strength of your Wifi router. 

The M2 Pro Miner is unlike any other IoT miner, it is a purpose built, low-power, multi-token Miner, using intellectual property, our own trademarks, and a few pending patents.

The M2 Pro is a german engineered master-crafted Crypto Miner that you simply can’t buy “off the shelf”, like other Raspberry Pi-based Miners. How can we prove this? The M2 Pro Miner is the only IoT Miner offering::

• 2 x 2nd Generation lora gateway chips (SX1302)
• 16 Frequency Channels
• Mines Multi-Tokens $MXC, $DHX & $BTC

Is an outdoor/external miner with a unique IP66 enclosure and UV resistant coating Including the Pole Mount with every M2 Pro, you can further your extended reach, up to 1,256 square kilometres (485 sq/miles), this is because the M2 Pro is able to be installed outdoors, in all weather, that’s unique to the M2 Pro Dedicated, professional hardware, based on iMX6 industrial processor The only IoT Miner to offer optional internal 4G communication modem for remote installation The only IoT Miner with self-diagnostic features including; temperature, voltage, current, power, pressure, and 3D orientation monitoring

The only Miner that supports passive PoE 12–24V and USB-PD 20V power supply for remote installation Built-in hardware secure elements, xp hardware identification & security The all-weather outdoor miner, industrial temperature range from -40 degrees celsius (-40F) to +60 degrees celsius (+140F)

M2 Pro runs on PoP (Proof Of Paricipation) which includes data transfers as a factor which will be affecting your mining rewards. Though, you still will be mining tokens for just participating in the decentralized LPWAN network. Earning based on data packets will be on top of base income.

The MXC Foundation is committed to creating a vibrant data network. To do this we must ensure that miners stay active, how do $MXC ensure that miners stay active? By continuing the POP process, it is in the interest of $MXC, Miners, and the Data community to keep the M2 Pro miners in operation for as long as possible. Our goal is to have this network fully self-sustainable, but we also realize this will take time, this is a journey we are prepared to walk together, with our miners and community. In regards to the M2 Pro miner and the material and product itself, we expect our award-winning M2 Pro Miner to continue to function as a data network powerhouse for up to 10 years, that’s German engineering, that’s high-class materials, that’s MatchX quality!

As you would have heard before, size doesn’t matter!

The M2 Pro LoRa modulation makes it possible to receive really weak signals, which gives much higher sensitivities the sensitivities down to -140dBm are possible, so with +27dBm of RF power and 3dBi antennas gain we get a link budget of 173dB which is a lot! Free path loss at 900MHz over 40km is 123dB so there is still room. https://www.pasternack.com/t-calculator-fspl.aspx

In short: Das Kaiser Projekt “DKP” has finished its first testnet, average tester mined $38.60 USD worth of Bitcoin. This was possible via break-through low-power mining, fueled by the MXProtocol. The average power consumption to mine this quantity of BTC was determined to be 60 watts per miner over the course of 30 days, resulting in a calculated average of close to 2 watts per day.

the MXC development team has successfully proven that low-power BTC mining is indeed possible when the Proof of Participation model is leveraged through a bridge, in which the Supernodes carry the computation efforts rather than the miners themselves directly.

R

Don’t transfer USDT to biki

Transfer Algo or LTC to your Biki, exchange that for USDT on Biki itself and then exchange the usdt for whatever you need, DHX or MXC

Otherwise, sending 100 USDT to Biki will lose you 15 usdt or something

https://landing.biki51.com/en_US?inviteCode=

I sent algo to my Biki using Coinbase, 999 USD worth of algo and I lost like 6 dollars on it

A: In acest moment ai nevoide de cca 9932 mPower pt 1 DHX deci la cei 50K MXC daca ii faci lock pt 3 luni unde nu iei deloc bonus vei avea nevoie de 50,000/9932= 5 DHX bonded ca sa minezi la 100% eficienta Dar atentie pt ca suma de mPower ceruta creste aproape zilnic cate un pic cate un pic, deci cei 50K MXC vor ajuta sa minezi eficient 5DHX pt inca vreo saptamana asa dupa aceea vei avea nevoie sa mai adaugi daca vrei sa tii pasul. La 5DHX bonded vei primi 5/70=0.071 DHX pe zi

Ai aici un spreadsheet excellent care e updatat regulat si iti da toate informatiile https://docs.google.com/spreadsheets/d/1NLkSf6T23dAS77gJ3_b-veXvlVQ1Z5Z3kg-AcxI43Zk/edit?usp=sharing

You don’t earn it with the m2 pro miner, you earn it via the DataDash App buy locking MXC and bonding DHX

The M2 Pro works seamlessly with the Data Dash App. The Data Dash App allows users to monitor their profits, adjust their mining and staking needs, and withdraw their mined/staked tokens. The Data Dash is a sleek and super simple App that allows users to not only Mine MXC, in conjunction with the M2 Pro, but also allows users to mine multiple tokens.

The MXC Foundation will continue to develop a wide range of “on the go” products, which will integrate with the Data Dash App. We look forward to building the Data Dash App into a hub for tokens, mining, data trading, and the functional usage of M2 Pro devices and sensors, with the ability to monitor, control, and profit from their data and general functionality

The M2 Pro is a multi-token Crypto Miner, a unique front-runner in the world of Multi-Token Miners and the leader in the world of IoT Mining.

The M2 Pro currently Mines $MXC Token, additionally $DHX / DataHighway Token and $BTC / Bitcoin will be added to the mining list in Q1, 2021 with IPFS expected to be launched later in 2021. The mining process is planned to be simultaneous, cross token.

The M2 Pro will continue to add further tokens as we continue to spread across the globe. The uniqueness of the M2 Pro comes from the POP or “Proof Of Participation” model, allowing users who participate in the Global Data Network to profit from their network

The MXC Foundation is committed to creating a vibrant data network. To do this we must ensure that miners stay active, how do $MXC ensure that miners stay active? By continuing the POP process, it is in the interest of $MXC, Miners, and the Data community to keep the M2 Pro miners in operation for as long as possible. Our goal is to have this network fully self-sustainable, but we also realize this will take time, this is a journey we are prepared to walk together, with our miners and community.

In regards to the M2 Pro miner and the material and product itself, we expect our award-winning M2 Pro Miner to continue to function as a data network powerhouse for up to 10 years, that’s German engineering, that’s high-class materials, that’s MatchX quality!

You can view your, and many other M2 Pro on MXCMapper.com this is a website where you can see most of the M2 Pro that are connected to Data Dash and from whom we receive a “heartbeat”. Miners who do not demonstrate a heartbeat will not show on this map.

M2 Pro Miners are highlighted in BLUE, for other LPWAN / LoRA devices, they are in GREY. We show both of these elements for a key reason, yes, MXC is a company that promotes the $MXC Token and the M2 Pro Miner, but more importantly we are here to promote “LPWAN” and “LoRa Technologies” as a basis for our existence. Without this decentralized network, there is no Data Network, so the MXCMapper site allows and promotes new users to this technology to see the length and breadth of this groundbreaking, global data network. We believe in LPWAN (Low Power Wide Area Network) and wherever we can, we will promote this technology.

MXCMapper.com is manually updated by our developer team at MXC, there may be a slight lag in the updating of the map, but we will continue to endeavour to keep it relevant for all users.

You will notice that the M2 Pro listed on the MXCMapper.com aren’t showing an “exact” location, the reason we do this is to protect the identity of our users, this is also because, as a German company we are under strict EU orders to protect the identity and location of all of our users, this is GDPR at work. You may notice some GREY devices in some peculiar places, eg: Antarctica or in the Ocean, this, once again, is a demonstration of the decentralized and global reach of LPWAN and our friends at TTN, we certainly hope to see the M2 Pro in all continents across the globe very soon. This is our vision, and we can achieve this together!

The idea surrounding sensor downlinks is, in its essence, to set a new global business model. As the Global Data Network grows and more sensors connect, M2 Pro holders set their individual price for downlinks, sensor users and data procurers would then choose an M2 Pro in their region to send/receive data downlinks.

Therefore, downlinks are, in the end, expected to both replace and increase M2 Pro Miner’s current returns.

M2 Pro users are encouraged to set their own downlink price, MXC has taken the effort to offer a pre-set amount for guidance, so you can get an idea of what is a “normal” or “expected” downlink rate, however, it is ultimately up to you as an individual M2 Pro user to decide your downlink price for others to use your M2 Pro network service. In the end, the invisible hand of the free market decides whether your price is too high or too low. If M2 Pro users offer excellent service, including uptime, and competitive downlink prices, they will most likely receive the lion’s share of data traffic and the most profits in their M2 Pro region.

You can purchase your M2 Pro Miner from:

• MatchX https://www.matchx.io/m2pro/
• The New M2 Pro Miner Site: https://m2prominer.com
• Amazon: M2 Pro Multi-Token Miner

You can pay for the M2 Pro in a multitude of ways. Via Pay-Pal, Apple Pay, AliPay, iDeal, Wire Transfer, Credit Card, as well as Bitcoin and USDT (Tether).

The M2 Pro team has warehouses in Germany, China, Korea, and the United States, ensuring your order gets to you ASAP.

Shipping times for the following countries/regions are expected, however with Covid these times may see some increased delay:

M2 PRO GLOBAL DELIVERY TIMES

• EUROPE: 2–5 Business Days
• USA / NORTH AMERICA: 3–5 Business Days
• KOREA: 3–5 Business Days
• CHINA: 1–3 Business Days
• MIDDLE EAST: 7–10 Business Days
• SOUTH AMERICA: 8–10 Business Days
• AFRICA: 10–12 Business Days
• AUSTRALIA: 10–12 Business Days

ALL OTHER REGIONS: 12–14 Business Days

The M2 Pro Miner is unlike any other IoT miner, it is a purpose built, low-power, multi-token Miner, using intellectual property, our own trademarks, and a few pending patents.

The M2 Pro is a german engineered master-crafted Crypto Miner that you simply can’t buy “off the shelf”, like other Raspberry Pi-based Miners. How can we prove this?

The M2 Pro Miner is the only IoT Miner offering::

• 2 x 2nd Generation lora gateway chips (SX1302)
• 16 Frequency Channels
• Mines Multi-Tokens $MXC, $DHX & $BTC
• Is an outdoor/external miner with a unique IP66 enclosure and UV resistant coating
• Including the Pole Mount with every M2 Pro, you can further your extended reach, up to 1,256 square kilometres (485 sq/miles), this is because the M2 Pro is able to be installed outdoors, in all weather, that’s unique to the M2 Pro
• Dedicated, professional hardware, based on iMX6 industrial processor
• The only IoT Miner to offer optional internal 4G communication modem for remote installation
• The only IoT Miner with self-diagnostic features including; temperature, voltage, current, power, pressure, and 3D orientation monitoring
• The only Miner that supports passive PoE 12–24V and USB-PD 20V power supply for remote installation
• Built-in hardware secure elements, xp hardware identification & security
• The all-weather outdoor miner, industrial temperature range from -40 degrees celsius (-40F) to +60 degrees celsius (+140F)

That often depends on the Miner itself. This is ultimately a “Proof Of Participation” model, so ultimately the first essential element you need to ensure is that you are connected to the MXC system via the Data Dash App. You can do this by simply scanning the QR code on your M2 Pro and connecting to the Data Dash App.

Once the M2 Pro is connected, you are technically mining. However, to improve your minability it is essential that you place your miner in an elevated position, ensure you don’t incur any internet connectivity interruptions, ensuring up-time. These are the ultimate essentials to mine $MXC and other tokens.

Most miners report that they mine around $10USDT to $14USDT with the M2 Pro on a daily basis, yes, on a daily basis, all with very little effort. Of course, there is a general range, and mining of $MXC can increase based on the activity and downlinks you serve, but at present, the approximate rate varies around the above-mentioned amounts. For more information on average returns please ask our followers in our telegram group or on Twitter.

The financial return on an M2 Pro can vary greatly, MXC can not give any guarantee on returns, nor on the price of your returns, this is due to the fact that cryptocurrencies are extremely volatile. As a company we do our best to ensure you receive a solid return on your investment, we support those who support us.

No, the M2 Pro mines without the need or dependence of another miner. The fact is, LORAWAN or LPWAN or LORA the technology on which the M2 Pro operates is an independent and decentralized technology, by having to force miners to rely on other devices that are out of their own control goes against the very aspect we stand for, data decentralization!

As a result, a single M2 Pro Miner can change your region, your city, and your world! Simply connect, ensure high elevation and you are a part of our MXC Global Movement, mining should be decentralized, mining should be simple!

If you own 2 M2 Pro it would ultimately double your earnings, however, if there was another M2 Pro in your street it would in no way affect your base earnings. MXC promotes decentralized mining, anything else is something you should be wary of!

The M2Pro is certified to operate under FCC/CE/RCM/IC/KC and Telec regulations for radio equipment. Our hardware and software ensure to operate safely and within local radio limits complying with local regulations.

The M2 Pro uses Lora Technology or LPWAN, to find out more about this technology please click HERE. The M2 Pro uses radio frequencies, so your M2 Pro frequency is just as safe as turning on your radio at home.

Yes, you can take your M2 Pro across the room, across the street or across the country! Please realise that for the time the M2 Pro is disconnected it can not mine. Also, if you are planning on changing country please get in touch with the team at MXC hello@mxc.org to ensure your M2 Pro will still function according to international requirements.

As we continue to roll out the MXProtocol mining will be affected by things such as elevation, network distribution, and withdrawals. The MXC Foundation developers are setting up a “health bar” which will offer individual users transparency for their M2 Pro, allowing everyone to be able to see the health of their M2 Pro and make changes to increase the mineability of their M2 Pro.

Remember, it’s your Miner and your profits, similar to if it’s not your keys it’s not your crypto, you don’t need to have another Miner around you, therefore, your Miner, your profits! The M2 Pro is a powerful long-range Crypto Miner, where others can only dream of reaching a maximum of 300 metres, the M2 Pro covers up to 1,256 square kilometres, this is high-quality, German-engineered hardware, this is the M2 Pro!

Put simply, MXC is building a Global Data Network. We do this to ensure massive amounts of data are sent second by second, imagine billions upon billions of data packets traveling across this purpose-built data network? To do this we must first ensure the data network is strong enough and powerful enough to facilitate that many transactions as a result the MXC Foundation and its investors are facilitating the POP or “Proof of Participation” Token Mining Model, yes this model literally allows for any token to be mined. It also provides a substantial reward for helping MXC cover the globe in our data net.

Imagine a company like UBER, as they started out, they needed to pay drivers to drive around cities waiting for people to use their service. As more and more people downloaded the UBER app and started using their service, the need to pay these drivers reduced, as the customers started taking over.

Similarly to MXC, currently we are building a global network, as UBER drivers transport people from one destination to another, MXC is transporting user data from one destination to another. To do this we incentivize our “Drivers” or Network contributors (Miners) to ensure there is a transporter for this data. As data contributors, devices, sensors and downlinks increase across the globe our Miners will have the chance to further increase their earnings, allowing downlinks to occur and profiting from their network “as a service”. This is the model we are building to dominate this market, a model that is already proving extremely successful, covering large portions of the Korean Peninsula, the Netherlands, China and we are soon coming to a street near you!

There are a number of ways you can increase your earnings.

1. You can stake your mined MXC on the Data Dash App
2. You can earn $DHX token by using your M2 Pro as a Mining Boost
3. You can facilitate more sensor connections and downlinks by offering a complete data service, via your M2 Pro
4. You can #HODL your MXC

​Can you elaborate on the governance token?